Profile End Tap Machining

80/20's end tap service allows for mounting of end caps, end fasteners, leveling feet, casters, joining plates, base plates and more. Tap services are per end, you must specify the left or right end when tapping a bar with additional machining servies.

Refer to the machining Services section of the 80/20 big book of solutions for more profile and panel machining services.

Service No.	Taps Per End	Tap Size (Depth)	Extrusion Part No.
20-7063	1	M5 x .8 (22.00mm)	20-2020
20-7061	1	10-32 (.875")	20-2020
20-7047	2	M5 x .8 (22.00mm)	20-2040
20-7046	2	10-32 (.875")	20-2040
20-7067	4	M5 x .8 (22.00mm)	20-4040
20-7064	4	10-32 (.875")	20-4040
30-7059	1	M8 x 1.25 (28.50mm)	30-3030
30-7060	1	5/16-18 (1.125")	30-3030
30-7048	2	M8 x 1.25 (28.50mm)	30-3060
30-7045	2	5/16-18 (1.125")	30-3060
30-7056	4	M8 x 1.25 (28.50mm)	30-6060
30-7055	4	5/16-18 (1.125")	30-6060
45-7053	1	M12 x 1.75 (38.00mm)	45-4545 / 45-4545-Lite
45-7054	1	1/2-13 (1.500")	45-4545 / 45-4545-Lite
45-7032	2	M12 x 1.75 (38.00mm)	45-4590
45-7024	2	1/2-13 (1.500")	45-4590
45-7036	4	M12 x 1.75 (38.00mm)	45-9090
45-7035	4	1/2-13 (1.500")	45-9090